DESCRIPTION:SUPER LITE is a revolutionary ready mixed lightweight white filler based on a new micro cell technology. It is ideal for the preparation of surfaces in one go prior to painting. It is suitable for plaster, concrete, brick, stones, render, wood and much more.ADVANTAGES Fills all cracks in one go – No need to build up layers of filler Easy to use – lightweight paste is easy to apply Quick drying – ready to paint/prime in 30 minutes – 1 hour Sanding is not required – finishes to a smooth finish No sagging Non-shrink Interior and exterior use Rapid and clean applicationAPPLICATIONS It is suitable for quick and easy preparation of surfaces prior to painting as well as filling cracks of interior and exterior surfaces. It is suitable for plaster, smooth concrete surfaces, brick, stones, render, wood, plasterboard, cement board and much more.SPECIFICATIONS:Coverage: acording to applicationThinning: noApplication: by knifeTouch dry: 30 minutes 20oC Hard dry: 1 - 2 hours 20oCExterior useInterior useApplication temperature: 10oC - 35oCCleaning: with waterINSTRUCTIONS FOR USE: Surfaces must be dry and clean from dust, grease and loose particles and other contamination Apply with a spatula or spreader Press the filler onto the surface - hole. Smooth over surfaces with spatula or knife Sanding is not normally required, although if needed it can be sanded The final surface may be primed and painted Close lid immediately after use to prevent dryingIt is advisable to perform a suitability test prior to full-scale applicationREMARKS Do not use to fill plastics or metals Do not apply externally when rain is imminent (within 5 hours of application) Do not apply at temperatures (ambient and surface) below 5oC Not suitable for repairs to permanently wet areas